Hardware - Wago PFC I/O
Wago PFC I/O
CDP Studio enables you to build and run the control system on the Wago Programmable Fieldbus Controllers (PFC), and to use their I/O modules. The Wago 750-series is pre-integrated in CDP Studio and the different I/O modules are available by simple drag and drop, no coding is required to use the I/O modules. The CDP resource WagoPFCIOServer in the WagoPFCIO library is required to communicate with the physical I/O modules on the Wago PFC.
Note: This IOServer is for running CDP inside the Wago PFC controllers, with native communication to the KBUS. If you want to communicate with f.i. an external Wago 750-342, please look at the ModbusIO instead.
Note: In CDP Studio, I/O numbering start at 0, meaning that the first channel has the number 0.
See below for a generic description about the WagoPFCIOServer configuration, and a simple WagoPFCIOServer configuration example.
Note: For more information about CDP Technologies partnerships, see Our Partners and for detailed information on Wago Corporation, see the Wago website for more information.
Get started with CDP Studio today
Let us help you take your great ideas and turn them into the products your customer will love.